Can carry one 40 ft. container, or one 45 ft. container, or one 20 ft. container and meets all DOT and FMVSS regulations and applicable to operations in the United States.
GENERAL SPECS
Tare Weight:
7,800
GVWR:
57,600 lbs. (20 ft. position), 75,000 lbs. (40 ft. position) or 75,000 lbs. (45 ft. position)
Steel & Fasteners:
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated
Cross Member:
Fabricated steel
Upper Coupler Assembly:
Pick up plate is 5/16 in. thick
Fifth Wheel Height:
48 in.
Front Bolster:
Fabricated channel with steel casting end plates
Rear Bolster:
channel type
ICC Bumper:
47 in. long tube
Mud Flaps:
24 in. x 24 in. white plastic with Cheetah Logo. 4 hole mounting
Electrical System:
12 volt, 7-way split pin receptacle plug; modular wiring harness.
Slider Mechanism:
Air operated locking pins
Slider Beams:
I-beam
Overall Length Closed:
29 ft. 7 in.
Overall Length Extended:
40 ft. 6 in. or 47 ft. 6 in.
Gooseneck Beams:
Fabricated I-beam with high tensile steel
DIMENSIONS
Overall Chassis Width:
96 in.
Maximum Rear Height:
48 in.
LANDING GEAR
Landing Gear:
Two speed AAR approved, square leg. 55,000 lb. lift capacity and 160,000 static load capacity
Landing Gear Foot Group:
10 in. x 10 in. low profile sand shoes
Crank Handle Location:
Roadside
LIGHTING
Light Attachment:
Flange mounted
Light Type:
LED
BRAKES
Drum:
Steel outboard mounted
Lubrication:
Synthetic grease
Brake System Type:
2S1M
Brake Chambers:
30/30
WHEELS
Rims:
Stee 22.5 X 8.25 hub piloted tubeless
Tire Size:
11R 22.5, 14 PLY
Hub Type:
Steel
AXLES
Axle Type:
5 in. round, tapered, 71.5 in. long
Axle Quantity:
Two
Axle Centers:
49 in.
Tandem Location:
50 in. from rear
Kingpin Location:
24 in. from rear face of front bolster
SUSPENSION
Suspension Type:
Three-leaf spring ride
FINISH
Metal Preparation:
Clean, dry steel and NACE No. 3 /SSPC-SP-6 commercial blast cleaning
Primer:
Zinc-rich primer
Topcoat:
Black urethane
