Carries one loaded 20′ ISO container (including tanks) or two empty 20′ ISO containers with optional Hi-Lo kit
If a 43’ Tank chassis is needed for your operations, our Hi-Lo ready chassis will be perfect. Carries one loaded 20’ ISO tank container and when fitted with the optional Hi-Lo kit, carries two empty 20’ ISO tank containers. Need the chassis to lift in the front? Our chassis can be fitted with an optional lift-kit as well.
GENERAL SPECS
Tare Weight:
7,400 lb.
GVWR:
80,000 lb.
Steel & Fasteners:
All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coate
Main Beams:
Fabricated I-beam with high-tensile steel
Cross Member:
Fabricated steel
Upper Coupler Assembly:
5/16′-thick pick up plate
Fifth Wheel Height:
47 inches
Front Bolster:
Fabricated channel
Rear Bolster:
Fabricated channel
Mud Flaps:
24″ × 18″ white plastic with 4 hole mounting
Electrical System:
12 volt, 7-way split pin receptacle plug; modular wiring harnes
DIMENSIONS
Overall Chassis Width:
96 inches
Overall Chassis Length:
43.5 feet
LANDING GEAR
Landing Gear:
AAR-approved Two speed with square leg. 55,000-lb. lift capacity and 160,000-lb. static load capacity
Landing Gear Foot Group:
10″ × 10″ low profile sandshoe
Crank Handle Location:
Roadside
Lift Device:
Lift ready but not included
Hi-Lo Kit:
Hi-Lo ready but not included
LIGHTING
Light Attachment:
Flange mounted
Light Type:
LED
BRAKES
Drum:
Steel outboard mounted
Lubrication:
Synthetic grease
Brake System Type:
2S1M
Brake Chambers:
30/30
WHEELS
Rims:
22.5″ × 8.25″ steel
Tire Size:
11R 22.5
Hub Type:
Steel
AXLES
Axle Type:
5″ round, tapered, 71.5″ long
Axle Quantity:
Two
Axle Centers:
109 inches
Tandem Location:
81.4 inches from rear to center of suspension
Kingpin Location:
15 inches from front of trailer
SUSPENSION
Suspension Type:
Three-leaf spring ride
FINISH
Metal Preparation:
Clean, dry steel and NACE No. 3 /SSPC-SP-6 commercial blast cleaning
Primer:
Zinc-rich primer
Topcoat:
Blue urethane
